A genuine-looking fake id starts with the correct printer. A card printer is an electronic desktop printer with single card feeders which print and personalize plastic cards. Card dimensions are usually Generally card printers are designed with laminating, striping, and punching functions, and use desktop or web-based software.
If your license requires a magnetic stripe and you want it to be scannable, it can be encoded with an encoder. Generally these are very expensive and are difficult to find.
Search online for discount suppliers if you like. There are two types of magnetic stripes, HiCo and LoCo. The encoders for these typically were much more expensive than for LoCo. Most HiCo encoders encode LoCo stripes as well. Encode the magnetic stripe after the card is finished. Buy synthetic paper. There are two types of synthetic paper that are nearly the same.
Teslin and Artisyn paper are single layer, silica-filled, polyolefin printing substrate with unique microporous and temperature resistance features that make it the product of choice for laminated ID badges.
Printing on Teslin with an inkjet does not work well and tends to look grainy and smeared. They are cheaper than Teslin, and work well with all types of printers including inkjet and laser printers. It also tends to produce better print-quality results. Arcadia also sells perforated sheets that punch out in the size of the ID cards. Select your printer.
The preferred method is to use a pigmented-based inkjet printer like an Epson printer with DuraBrite ink. This tends to produce incredible results and works well with Teslin, even though it is not a laser printer. Laser printers produce sharp and clear images, but the ink tends to look waxy.
A dye-based inkjet printer is that standard color printer that most people have in their homes. Again, if you use dye-based inks, make sure to use Artisyn. You should print on the highest quality photo settings. Print the ID. Print on one sheet of paper, both front and back. Cut out the ID. If you are using microperforated Artisyn, you can skip this step. Otherwise, start by cutting out the ID from the paper. Select the layer that your photo is on and slide the brightness, contrast, and saturation to adjust the colors and light in your photo.
Drag the image on to the template and trim any edges to make it fit. Import your new photo into the ID template and drag it to the proper location.
Some templates will automatically center it for you, but you may need to crop the image so that it fits the slot for the portrait. If the photo stays behind the template when you move it, right click the photo and select the layers option. This will reduce the odds that the resolution comes out fuzzy when you print the ID.
Adjust the text in the boxes so that they match your description. In the United States and many other countries , the eye color and hair color codes are 3 letters.
They represent a corresponding color for hair and eyes. Use the code that most closely matches the hair and eye color of the person in the photo. Modify the restriction and endorsement codes for your ID. Some IDs have restrictions and endorsements for drivers with disabilities, special exemptions, or unique licenses. If either of these apply to you, change the endorsement code.
Enter your signature using a thin paint tool in your editing program. Use a thin drawing tool in your photo editing software to include the signature. Try to match the thickness of your line to the thickness of a real signature. Select black for the color of your line and use your mouse to carefully draw your signature. It may take multiple attempts before you get a signature that works. Feel free to redo it until you get a signature that matches your real one. Do your best to get the thickness of the lines to match by adjusting the size of your brush in the editing software.
Keep in mind that the signature on IDs will never extend beyond the allotted borders for it on a real ID. Use the erase tool to trim any sections that go past the box for your signature. Modify your printer settings to set them to the highest resolution. Go into the printer settings on your computer and set each slider to the highest quality possible. They are usually more expensive though. Print the ID on Teslin paper and fold it into the butterfly pouch.
Print your image. It may take a longer time than usual for the image to print. Let the ink dry by letting the paper sit for minutes. Open a butterfly pouch by lifting the sheet and sliding the ID into it. Place the protective paper that came with the pouch on top of the butterfly pouch. The crease at the top is the side you enter into the laminator first. This ensures that no air bubbles get trapped in the laminate. Laminate the pouch and trim the edges to finish the job.
Set your laminator to a medium heat level. Place the sheet, Teslin paper, and butterfly pouch into the laminator crease-first. Slowly guide the ID through the machine and let it sit for minutes before opening the paper and discarding it. You will see the pouch sealed around the ID. Trim the edges with a utility knife, to get a clean cut against the edge. But make sure you line it up perfectly; otherwise it will be slanted and people will know it's fake. Not Helpful 10 Helpful You're pretty much screwed at that point.
Don't try to get alcohol or cigarettes if you are underage. If you do have a fake ID, don't let the police get hold of it. Not Helpful 19 Helpful Would it be cheaper to make my own one or buy a pre-made one? It's cheaper to buy one, and the person who made it will get in a lot of trouble, whereas you're not as likely to.
Not Helpful 23 Helpful Some shops near you could also have some of this stuff. Not Helpful 7 Helpful Yes, just be sure to keep the changes realistic. And consider changing the name as well as any other parts so that your true identity isn't shown on the ID. Stay safe! Not Helpful 5 Helpful Is it illegal if I just want to do this for fun and not use it for anything?
Can I get in trouble for that? Yes, it is illegal to possess fake identification regardless of whether or not you choose to use it. How do I decipher what combination of numbers to use on a fake license, and does it matter? When scanned, is the number combination traceable? This would depend on the state issuing the license. You could simply ask at the DMV, or search the state agency website.
The number is traceable to each individual in the DMV database. States classify this as personal information that should not be shared without the license owner's permission, which is why Uber was found to be at fault and charged large fines after a breach of their systems leaked driver's license numbers a few years ago. Not Helpful 4 Helpful Probably not.
If your prospective employer is asking you for ID, they're probably going to run a background check on you, which involves logging into a government database.
0コメント